Amadas M2120A Скачать руководство пользователя страница 68

Страница: 68 / 130

Your AMADAS M2120A is available with
an optional Off-load Conveying System
(OCS) that comes with an unloading
conveyor. The conveyor operates as follows:

•

The conveyor is controlled by two tractor

remotes, one to extend and store the
conveyor, and one to power it.

•

A container is placed underneath the

conveyor whenever it is turned on.

Note:

Running the conveyor without a

container will cause you to dump product
on the ground.

Conveyor Safety

Before Using the OCS

Contact with an obstruction, or high voltage
power line could result in death, or serious
personal injury.

Be aware of the combine’s height and width

which can be found on the Specifications

Table in the Introduction Chapter.

Check overhead clearance to make sure no
power lines, overhead limbs, or any other
obstructions exist.

To prevent death or serious personal
injury NEVER stick your hand into any
moving part of the conveyor.

To prevent death or serious personal
injury NEVER stick any body part into
any moving part of the conveyor.

To prevent death or serious personal
injury NEVER stand, sit, or ride on the
conveyor when it is in motion.

DANGER

Off-Loading Conveyor System

M2120A PT Peanut Combine

4/24/19

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 68 / 130

Результаты поиска

Содержание M2120A

Отзывы: