manualshive.com logo in svg

Amadas M2120A, Руководство пользователя, Страница: 24 / 130

Поделиться
Скачать
Amadas M2120A Скачать руководство пользователя страница 24

 
 

  

Safety Practices–Maintenance

• 

It is crucial to maintain your machine  in  
proper working condition.

• 

Check and clean around the machine 
frequently.

• 

Before performing any inspection or 
service, engage parking brake, turn off 
engine, and remove key.

Maintain Your Machine

Practice Safe Maintenance

• 

Understand the service procedure before 
doing work. Use proper tools and refer to 
this Operator’s Manual.

• 

Keep service area clean and dry.

• 

Lower machine to ground, engage parking 
brake, turn off engine, and remove key 
before performing maintenance.

• 

Allow time for the machine to cool 
completely.

• 

Never lubricate, service, or adjust machine 
while it is moving.

• 

Keep hands, feet, and clothing from 
power-driven parts.

• 

Securely support any machine elements that 
must be raised for service work.

• 

Keep all parts in good condition and properly 
installed.

• 

Fix any damage immediately; replace worn 
or broken parts.

• 

Keep the machine free of any buildup of 
grease, oil, or debris.

 
 

  

• 

Always lower the attachment or implement 
to the ground before you work on the 
machine. If the work requires that the 
machine or attachment be lifted, provide 
secure support for them. If left in a raised 
position, hydraulically supported devices 
can settle or leak down. 

• 

Do NOT support the machine on cinder 
blocks, hollow tiles, or props that can 
crumble under continuous load.

• 

Do NOT work under a machine that is 
supported solely by a jack.

• 

Follow all safety procedures in this manual 
for supporting the machine.

• 

When implements or attachments are 
used with a machine, always follow safety 
precautions listed in the implement or 
attachment’s operator’s manual.

Support Machine Properly

Safety

M2120A PT Peanut Combine

4/24/19

MAN152

10

Содержание M2120A



































































































































Отзывы:

Нет отзывов