Amadas M2120A Скачать руководство пользователя страница 107

Страница: 107 / 130

5. Make sure that idlers are aligned and

fasteners are tight.

6. Replace shields before operating the

machine.

V-belt drives power the fans, hydraulic power
(optional), separating section, and stemmer
saws. The belts also transmit power from the
PTO input gearbox to the main jackshaft.

Important!

Properly maintaining the belts is

essential to ensure efficient machine operation.

Check and adjust the belts as follows:

1. Make sure the tractor engine is shut off.

2. Open shields covering drive belts.

ALWAYS stop the combine, set the parking
brake, shut the tractor motor off, and
remove the key before servicing.

Belt Adjustment

3. Check belts and sheaves for wear. Replace

if necessary.

4. Check the main drive belt in the middle.

There should be no more than 1/2”

deflection. Adjust the belt tension as

necessary.

Figure 7-1: Access Drive Belts

MOVING PARTS HAZARD

To prevent serious injury or death:

• Keep hands, feet, and clothing away

from power-driven parts.

• Never clean, lubricate, or adjust

machine when it is running.

DANGER

Death or serious personal injury will
result from entanglement.

ALWAYS make sure all drive shields and
guards are in place when the combine is in
operation.

DANGER

4/24/19

Maintenance

M2120A PT Peanut Combine

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 107 / 130

Результаты поиска

Содержание M2120A

Отзывы: