Amadas M2120A Скачать руководство пользователя страница 69

Страница: 69 / 130

Conveyor Safety (cont.)

To prevent death or serious personal
injury NEVER drive on roads with the
conveyor extended.

Always make sure the conveyor is in
stowed position on the conveyor rest
before taking it on a road.

Be aware of the length of the conveyor
when traveling. Even when in the stored
position, the conveyor extends several
feet past the rear of the combine and
presents a substantial hazard for hitting
obstructions.

It is important to remember the following safety
items when your combine is equipped with the
OCS option:

•

Always keep in mind the length of the

conveyor and how far out it extends, even
when in the stored position.

•

Be careful when backing the combine, as the

conveyor extends several feet past the rear
of the combine.

•

When not using the conveyor, retract it into

the stowed position. Make sure the conveyor
is in place on the conveyor rest.

•

Always make sure the conveyor is in the

stowed position when you drive it on a road.

DANGER

4/24/19

Off-Loading Conveyor System

M2120A PT Peanut Combine

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 69 / 130

Результаты поиска

Содержание M2120A

Отзывы: