Amadas M2120A Скачать руководство пользователя страница 20

Страница: 20 / 130

•

ALWAYS stay clear of the header pick up
and header auger at all times.

•

ALWAYS be sure that the combine is on
solid, level ground before you dump the
basket.

Safety Practices–Equipment

Transport Machine Safely

•

Comply with state and local laws.

•

Be familiar with tractor operations and
follow all safety instructions in the tractor’s
manual.

•

Before moving away, always check
immediate vicinity (e.g., for children).

•

NEVER exceed a maximum speed of 20
MPH.

•

Always adapt ground speed to road or field

conditions. Make sure you have adequate
control of steering and stopping.

•

Avoid sharp turns, holes, ditches, and
obstructions which can cause the tractor to
tip, particularly on hillsides.

•

Use following tow load weight ratios as
guidelines:

Note:

Sudden braking can cause a towed

load to swerve and upset. Reduce speed if
towed load is not equipped with brakes.

Operate Combine Safely

Tow Combine Safely

If the combine were to separate from the towing
vehicle, serious personal injury or death could
result.

• NEVER exceed the maximum towing speed

of 10 MPH loaded and 20 MPH empty.

• NEVER tow the combine without attaching

safety chains from the towing vehicle to the
combine.

These chains should have a minimum
combined breaking strength of at least 40,000
pounds.

20 MPH

when weight is less than or

equal to the weight of the tractor.

10 MPH

when weight is more than

weight of the tractor.

NEVER

tow a load more than double

the weight of the tractor!

Safety

M2120A PT Peanut Combine

4/24/19

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 20 / 130

Результаты поиска

Содержание M2120A

Отзывы: