Amadas M2120A Скачать руководство пользователя страница 83

Страница: 83 / 130

The AR rotor discharge boards control the
retention time of material in the forth picking
cylinder.

Start with the retention control handle
disengaged for normal conditions. Make
adjustments as follows:

•

If the vines are very “brittle” leave the control

  disengaged for less aggressive action.
  This will help avoid tearing the vines apart
excessively, which makes separation more

difficult

•

In “tough” conditions, or to remove very small

peanuts from bunch type vines clustered
around the tap root, move the control handle
toward engaged.

•

Only engage the handle enough to ensure

that good peanuts are not being left on the
vine behind the combine; start at the ½
engaged position.

•

If the control is engaged too far, shelling

may occur, and the vines will tear apart
excessively, possibly overloading the disc
separator.

•

The best performance is with the control

Retention Board Adjustment

Figure 5-5: Retention Board Control

handle engaged no further than necessary to
remove the good peanuts from the vines.

4/24/19

Controls and Adjustments

M2120A PT Peanut Combine

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 83 / 130

Результаты поиска

Содержание M2120A

Отзывы: