manualshive.com logo in svg

Amadas M2120A, Руководство пользователя, Страница: 28 / 130

Поделиться
Скачать
Amadas M2120A Скачать руководство пользователя страница 28

80935

80950

80932

80936

! 

CAUTION

1. Keep all shields in place.

2. Stop engine and remove key 

before leaving operator’s seat 
to adjust, lubricate, clean, 
unclog, or perform other work 
on the machine.

3. Wait for all motion to stop 

before servicing this machine.

4. Keep hands, feet, and clothing 

away from moving parts.

5. Keep off equipment unless 

seat or platform for operation 
is provided.

6. Keep all persons off of 

machine.

7. Make certain everyone is clear 

of machine before starting
engine.

80936

3”

5”

WARNING

80935

Read and understand 
operator’s manual before
using this machine.

!

!

Failure to follow operating
instructions could result 
in death or serious injury.

80941

WARNING

CRUSH HAZARD

PINCH POINT

To avoid serious injury or death:

• Keep clear of this area.

80932

!

 

Safety Decals (cont.)

Safety

M2120A PT Peanut Combine

4/24/19

MAN152

14

Содержание M2120A



































































































































Отзывы:

Нет отзывов