Amadas M2120A Скачать руководство пользователя страница 22

Страница: 22 / 130

Safety Practices–Equipment (cont.)

Avoid High Pressure Fluids

• Use extreme care when working with hydraulic

components and high-pressure sprays.

•

Escaping fluid or spray under pressure can

penetrate the skin, causing serious injury.

• To avoid injury, relieve pressure before

disconnecting hydraulic or other lines.

• Tighten all connections before applying hydraulic

or spray pressure.

• Search hoses/connections for leaks with a piece

of cardboard.

• Take appropriate safety measures to protect

hands, body, and face from high pressure fluids.

• Always wear appropriate safety gear to protect

hands, body and face from exposure to high

pressure fluids.

•

Never try to block the flow or search for leaks

of high pressure fluids with your hands even

if wearing gloves. High pressure fluids can

penetrate gloves as well as your skin.

• Always avoid direct contact of any high-pressure

fluid flow.

• If an accident occurs, respond as follows:

• Seek medical treatment immediately. Any

fluid injected into the skin must be surgically

removed within a few hours or gangrene can
result.

Alert the medical professionals that a fluid

injection or high-pressure spray injury has
occurred.

Give information on the type of fluid or spray

and time the accident occurred. If known,

include the amount of fluid injected and/or

the system injection pressure.

Surgery will most likely be required, so no
food or drink for the affected person.

Doctors unfamiliar with this type of injury should
reference a knowledgeable medical source. Such
information is available in English from Deere &
Company Medical Department in Moline, Illinois,
U.S.A., by calling 1-800-822-8262 or +1 309-748-
5636.

VERY IMPORTANT!! In some cases there is little
or no pain from an injection or high pressure spray
accident.

THIS IS STILL A SERIOUS EVENT THAT MUST
BE TREATED BY MEDICAL PROFESSIONALS!!!

Safety

M2120A PT Peanut Combine

4/24/19

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 22 / 130

Результаты поиска

Содержание M2120A

Отзывы: