Amadas M2120A Скачать руководство пользователя страница 122

Страница: 122 / 130

All Information Screen Functions and Controls

Figure 8-10: “Peanut Tech” All Information Screen

Left column:

the actual sensor information the

controller is receiving.

Right column:

Service hours since last reset:

• Speed of the left and right rotor.

State of peanut door:

• Backlit in green – door is closed.
• Backlit in red; audible alarm – door is open.

State of PTO:

•  Backlit in green – above 85%.
•  Backlit in red; audible alarm – below 85%.
•  Backlit in red; audible alarm – above 110%.

State of Actuator UP [more air]:

• Backlit in green – actuator is increasing air

at that time.

State of Actuator DOWN [less air]:

• Backlit in green – actuator is decreasing air

at that time.

Control Buttons

1. Return to HOME Screen.

2. Reset the service hours displayed in the upper

right corner of the screen.

3. Increase elevator air.

4. Decrease elevator air.

5. Mute an audible alarm for 5 minutes. Unmute

the audible alarm during the 5 minutes.

6. Toggle between manual and auto elevator

control. the current state is displayed on the
screen above the button.

7. Return to HOME Screen.

MANUAL

“Peanut Tech”

M2120A PT Peanut Combine

4/24/19

MAN152

108

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 122 / 130

Результаты поиска

Содержание M2120A

Отзывы: