Amadas M2120A Скачать руководство пользователя страница 44

Страница: 44 / 130

Combine Process

The AMADAS M2120A Peanut Combine functions
as follows:

• The combine removes peanut pods from

peanut vines which have been dug and
windrowed.

• Once separated and cleaned, the peanuts

are conveyed into the peanut storage basket
and vine material is passed out of the
machine.

• The combine is pulled and powered by a

farm tractor capable of speeds as low as 1
MPH while maintaining engine RPMs that will
produce a combine speed readout of 100%.

• Optimum harvest conditions exist when

windrows are harvested with peanut moisture
content between 14% and 20%.

• Very dry or very wet conditions as well as

excessive dirt and/or weeds in the windrow

could reduce separation efficiency and cause

an increase in loose shelled kernels (LSKs).

The detailed steps of the threshing, separating,
and cleaning process are on the next page.

Operation

M2120A PT Peanut Combine

4/26/19

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 44 / 130

Результаты поиска

Содержание M2120A

Отзывы: