Amadas M2120A Скачать руководство пользователя страница 58

Страница: 58 / 130

Operating Procedure (cont.)

8. Set the elevator air control handle in one-half

open position if using manual control.

Elevator Air

Control

Figure 3-27: Elevator Air Control

Note:

790 PTO RPM is standard for most

machines. Some combines are equipped
with an optional drive that requires different
input speeds. Refer to the PTO RPM on your
machine.

Note:

Make sure the basket lip extension is in

the operating position. Leaving the lip folded
obstructs the discharge of air from the bin.

Figure 3-28: Basket Lip Open

1. Move forward and harvest for 50 yards.

ALWAYS stop the combine, set the
parking brake, shut the tractor motor off,
and remove the key before you leave the
tractor for any reason.

2. Stop and check for proper operation. Refer to

the “Proper Operation” table at the end of this
section.

3. Make any necessary adjustments.

4. Run the combine down the windrow

approximately another 50 yards and check
performance again.

5. Set the controls as desired and continue to the

end of the row.

Begin Operations:

It is important to perform checks for
proper operation

To skip this step puts you at risk for personal
injury and the combine at risk for machine
damage.

CAUTION

9. Set the header height so that the pickup spring

fingers are one to two inches above the soil

(with the combine wheels in the row centers
as it moves over the windrow).

10. Engage the PTO and set combine speed at

100% (790 RPM tractor PTO output). Refer
to “PTO Speed Adjustment” in Chapter
5. Controls and Adjustments for more
information.

11. Harvest conditions vary. Operate the tractor

accordingly at 1 to 2-1/2 miles per hour.

DANGER

Operation

M2120A PT Peanut Combine

4/26/19

MAN152

Содержание M2120A



































































































































Результаты поиска

Содержание M2120A

Отзывы:

Amadas M2120A, Руководство пользователя, Страница: 58 / 130

Результаты поиска

Содержание M2120A

Отзывы: