Amadas M2120A Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 130

Amadas M2120A Скачать руководство пользователя страница 88

PTO Speed Adjustment

Proper PTO speed is essential to efficient

operation. PTO speed functions as follows:

A combine speed monitor, which monitors
combine speed from the tractor cab, is included
with the tech package and should be mounted
in the tractor. Refer to Chapter 8.

“Peanut Tech”

Monitoring and Control

for details.

The combine speed monitor measures
combine speed as a percentage of machine
design speed.

Figure 5-12: Tech Package Speed Control

The AMADAS M2120A is designed to operate
with 790 PTO RPM input, so the tractor will not
be required to run at its full “PTO speed”.

At machine design speed, the tractor PTO
output should be 790 RPM and the combine
speed monitor should read 100%.

Note:

Consistent combine speed is important

for the best harvesting performance. If the

combine speed fluctuates, check the combine

drive belts and tractor PTO system for the
source of problem.

A magnetic pickup assembly senses combine
speed. This pickup reads off of one of the
disc separator drive sprockets, and should be
adjusted to have a clearance of 1/16”, or less,
between sprocket tooth and pickup.

NOTICE

790 PTO RPM is standard for most
machines. Some combines are equipped
with optional drives that require different
input speeds. Refer to the PTO RPM on your
machine.

NOTICE

Make sure the Sprocket never actually
contacts the pickup.

This can damage the pickup and render it
inoperable.

Speed

Sensor

1/16”

Figure 5-13: Speed Sensor Location

Figure 5-14: Speed Sensor Setting

Controls and Adjustments

M2120A PT Peanut Combine

4/24/19

MAN152

74

«
...
86
87
88
89
90
...
»

Содержание M2120A



































































































































Отзывы:

Нет отзывов