ABB AC500 V3 Скачать руководство пользователя страница 93

Страница: 93 / 1029

Processor module

PM5630

PM5650

PM5670

PM5675

TB5660-2ETH

6 slots

)

6 slots

)

Remarks:

The slots can be used for connecting communication modules or AC500-S modules. Note that

only one AC500-S module can be connected at one terminal base.

) PM567x must have an index

≥

C0.

1.3.2.1.3 Storage elements

The processor modules are supplied without lithium battery. It must be ordered separately. The

TA521 lithium battery is used for data (SRAM) and RTC buffering while the processor module is

not powered.

See system technology - AC500 battery.

The CPU monitors the discharge degree of the battery. A warning is issued before the battery

condition becomes critical (about 2 weeks before). Once the warning message appears, the

battery should be replaced as soon as possible.

The technical data, handling instructions and the insertion/replacement of the battery is

described in detail in the chapter TA521 lithium battery

Chapter 1.8.2.4 “TA521 - Battery”

on page 897

AC500 processor modules are supplied without memory card. It must be ordered separately.

The memory card can be used

● to read and write user files
● to download a user program
● for firmware updates

Detailed information can be found in the system technology chapter.

AC500 processor modules can be operated with and without memory cards. The processor

module uses a standard file system (FAT). This allows standard card readers to read and write

the memory cards.

Only genuine MC502 memory cards are supported.

For more information on the technical data, handling instructions and the insertion/replacement

of the memory card, please refer to the chapter memory card MC502.

Chapter 1.8.2.1

“MC502 - Memory card” on page 884

Lithium battery

Memory card

Device specifications

Processor modules > AC500 (standard)

2022/01/31

3ADR010278, 3, en_US

Содержание AC500 V3






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание AC500 V3

Отзывы:

Похожие инструкции для AC500 V3

Бренды по названию

Популярные бренды

ABB AC500 V3, Руководство по оборудованию

Результаты поиска

Содержание AC500 V3

Отзывы:

Похожие инструкции для AC500 V3

Бренды по названию

Популярные бренды