Setup
Page 66
Frog 2 Operating Manual – Issue 4.3
Files
This section of Setup allows you to save and load show files and to load or clear User
Fixture Types (UFT).
Saving Shows
To save a copy of your show, you first need a storage media. The Frog 2 is supplied with a
32mb USB flash memory stick, although other storage media may be used with the
console. Connect your media to the USB port on the desk (any port will do). If using an
external floppy drive, remember to insert a floppy disk into the drive.
Press the [Files] key on the touch screen.
Press the [Save Show ] key on the touch screen. The Save Show window is displayed on
the touch screen:
Select the desired storage device by pressing the [Destination Device] key. This cycles
through all the available devices; select the one you require.
Select the Filename field and enter a name for the show file. This name will be used as
the file name on the destination device, so ensure it is unique and easily identifiable.
Select the [Save Complete Show] box and toggle it until it displays the option you require.
The Frog 2 allows you to save just the Setup, the Setup and Palettes, or the Complete
show.
Press the [OK] button to save the show.
Summary of Contents for FROG 2
