Zero88 FROG 2, Operating Manual

Page: 57 / 184

Setup
Frog 2 Operating Manual – Issue 4.3 Page 57
Desk Setup
The Desk Setup function allows you to configure or customise the settings on the desk to
your own requirements.
The Desk Setup function is divided into a number of different sections which are accessed
by pressing the corresponding soft button on the touch screen:
A summary of the Desk Setup options is provided below.
•
Displays - Indicate which monitors are connected; adjust the touch screen timeout,
brightness and contrast; re-calibrate the touch screen; adjust desk lamp brightness.
•
Peripheral - Allow mouse or trackball to control pan and tilt parameters; display soft
keyboard on touch screen.
•
Inputs
– Set up SMPTE and MIDI Timecode; CAN; Set Time; Set Date. Assign
Remote Switches.
•
Outputs – Configure DMX universes to DMX output sockets.
•
Behaviour – Keep parameters separate options; Page Holdover if Active; Confirm
Overwrites, UDF Action, UDK Action, Tie UDF/Playback Pages.
•
Default Times – Set up the default delay and fade times for each attribute (Intensity,
Colour, Beamshape, Position) for all new recorded cues.
•
Cue Stack Defaults – Set up default options for all new cue stacks including timecode
and chase modifiers.
•
Lock – Lock the desk; change the lock code (PIN).
•
Event Monitor – Indicates each front panel action (slider movement, key press etc.)
To make a change to any of the settings in Desk Setup, use the cursor keys to select the
required option and press SET. Use the arrow keys to select between different options or
enter the required value for numeric fields. Press ENTER to confirm the change.