Zero88 FROG 2, Operating Manual

Page: 51 / 184

Setup
Frog 2 Operating Manual – Issue 4.3 Page 51
Adding Duplicates
Move the cursor to the Duplicate 1 column for the required fixture and press the ENTER
key. The Patch Fixture popup window is displayed on the monitor screen:
Select the required Universe by clicking on the [Universe] button and selecting the
universe from the drop down menu.
Enter the required DMX address in the Address field provided or press the [Next Address]
button to automatically pick up the next available patch address in the selected universe.
Press the [OK] button to complete the patching operation or the [Cancel] button to cancel.
To patch further duplicates for the selected fixture move the cursor to the Duplicate 2
Column, Duplicate 3 column etc and repeat the above procedure.
When duplicates are patched for the selected fixture(s) additional columns are added to
the Edit Fixtures table (one column per duplicate address) as shown in the following
example: