Zero88 FROG 2, Operating Manual

Page: 101 / 184

Programming
Frog 2 Operating Manual – Issue 4.3 Page 101
Tracking Options
Below the source options section there is a row of buttons containing the tracking options
[Track Forward], [Track Backward], [Track Both] and [Cue Only]. These options are only
applicable and accessible when a cue (or cues) are selected.
These four options are mutually exclusive, with the default option being [Track Forward].
When an option is selected the button turns green. The tracking options work in the same
way as they do in the
Record Options Window .
Merge and Remove Options
These two buttons allow you to merge or remove the specified data in the programmer
from existing cues, palettes, UDFs or UDKs. These two buttons are mutually exclusive.
If [Merge] is selected the button turns green and the data will be merged into the selected
cue, palette UDF or UDK.
If [Remove] is selected the button turns green and the data will be removed from the
selected cue, palette UDF or UDK.
Clear Tagging
This button determines what happens to the parameters in the Program Window after the
update operation is performed.
If the [Clear Tagging] button is selected (green) then the parameters will be untagged after
the update operation.
If the [Clear Tagging] button is not selected (grey) then the parameters will remain tagged
after the update operation.
Attribute Selection Bar
The Attribute Selection Bar indicates which parameters will be recorded for each of the
different attributes (Intensity, Position, Colour, Beamshape and Effects).
When the Update Options Window is displayed - the attribute selection bar initially shows
green (tagged) for each attribute in which one or more parameters of that attribute are
tagged in the Program Window and grey (none) for those attributes where no parameters
are tagged.
Pressing each of the soft buttons cycles round the three options for that attribute. The
current option is indicated by the background colour of the button as follows:
Grey = No Parameters; Green = Tagged Parameters; Red = All Parameters.
OK and Cancel Buttons
Press the [OK] button to update the selected source options.
Press the [Cancel] button to close the Update Options Window without updating any items.