Zero88 FROG 2, Operating Manual

Page: 119 / 184

Cues, Stacks and Pages
Frog 2 Operating Manual – Issue 4.3 Page 119
Chase Options
Select the [Chase] button in the Cue Stack Setup Window.
Turn Into Chase
To turn the cue stack into a chase - select the [Turn into Chase] key on the touch screen.
Additional buttons and fields are then displayed in the window to allow you to adjust the
Chase modifers . The modifiers determine how the chase is output, what drives the chase,
it’s direction, speed, how it fades between steps and how many times it runs.
To adjust the chase modifiers, select the required field, then choose an option or enter a
numeric value, as appropriate. Press the [OK] button to complete the cue stack setup.
Drive
This modifier determines what triggers each step (cue) of the chase when it is running:
•
Auto – The chase runs automatically at the defined Speed.
•
Bass – Each step is triggered by a bass beat on the audio input on the desk.
•
Manual – Each step is triggered by pressing the GO button on the front panel.
•
Beat - Use the GO button to set or modify the beat when playing back the chase.
Direction
This modifier determines which order the steps (cues) are output when the chase is run:
•
Forward – The steps are output in increasing numerical order (eg 1,2,3,4,5).
•
Backward – The steps are output in reverse order (eg 5,4,3,2,1).
•
Bounce – Alternates between forwards and backwards (eg 1,2,3,4,5,4,3,2,1).
•
Random – The steps are output in a random order.