Zero88 FROG 2, Operating Manual

Page: 69 / 184

Setup
Frog 2 Operating Manual – Issue 4.3 Page 69
Desk Information
When the [Desk Information] key is selected a screen is displayed containing information
on the various software, firmware and BIOS installed in the desk as follows:
•
Co-Processor BIOS
•
Co-Processor Firmware
•
LCD BIOS
•
LCD Firmware
•
Main Processor BIOS
•
Main Processor Operating System
•
Desk Software
•
Serial Number
•
Fixture Library
Update Desk Software
This option allows you to update the operating software on the desk.
Copy the .upd file to a USB memory stick from your PC. Start the desk normally, and plug
the USB memory stick containing the update into the desk. If you wish to save your show
do so now as it will be cleared as part of the update process.
Press SETUP, then press the [Files] key on the touch screen.
Press the [Update Desk Software] key on the touch screen. You will be presented with a
list of the .upd files found on the USB memory stick.
Select the required file and then press the [OK] button on the touch screen.
Select the [Yes] button on the two confirmation popup windows that are displayed.
The update will now begin. Do not disconnect the power to the desk while this is occurring.
When the update is complete, the desk will prompt you to power-cycle the desk.
Update Fixture File
This option allows you to update the Fixture Library file on the desk.
Insert a memory stick containing the Fixture Library file into one of the USB ports on the
desk. Press SETUP, press the [Files] key on the touch screen, then press the [Update
Fixture File] button. The desk searches for the update file on the memory stick. Follow the
instructions shown on the touch screen.