Zero88 FROG 2, Operating Manual

Page: 163 / 184

Other Features
Frog 2 Operating Manual – Issue 4.3 Page 163
Output Window
The Output Window displays the outputs which are coming from all areas of the desk
(Programmer, Cue Stacks, UDF’s or UDK’s). The outputs can be viewed as DMX values,
Percentage values or parameter Details as in the
Program Window .
To display the Output Window press the [Output Window] key on the touch screen:
There are a number of soft buttons at the top of the Output Window which determine the
format of the output data as follows:
When the [Percent] soft button is selected a drop down menu is displayed with the
following options:
•
Percent – When this option is selected all the fixture parameter values are displayed
as percentages (ie 0 – 100% for both 8 bit and 16 bit parameters).
•
DMX - When this option is selected all the fixture parameter values are displayed as
DMX values (ie 0 - 255 for 8 bit parameters or 0 - 65535 for 16 bit parameters).
•
Details (%) – When this option is selected the fixture parameter values will be
displayed as the parameter detail names (eg Red, Gobo 1) where they are defined in
the fixture data. If parameter details are not defined, the window will show the actual
numerical values in %.
•
Details (DMX) – When this option is selected the fixture parameter values will be
displayed as the parameter detail names (eg Red, Gobo 1) where they are defined in
the fixture data. If parameter details are not defined, the window will show the actual
numerical values in DMX (0-255 or 0 – 65535).