Zero88 FROG 2, Operating Manual

Page: 149 / 184

Effects
Frog 2 Operating Manual – Issue 4.3 Page 149
The Effects Window
The
Effects Window
displays the Effect Parameters for each parameter of the selected
fixture(s). To display the Effects Window on the monitor screen press the [Effects Window]
soft key on the touch screen. Adjusting any of the effect parameters using the control
wheels is reflected in the Effects Window.
The
Effects Window
also allows you to edit the effect parameters of individual fixture
parameters directly. The fixture parameters (eg Pan, Tilt, Cyan, Magenta, Yellow etc) are
listed down the left hand side of the table and the effect parameters (Function, Speed,
Size and Offset) across the top of the table.
To adjust an effect parameter, select the required field using the mouse or cursor keys and
press the SET key. Use the cursor keys to select the required Function, or enter the
required numerical value for Speed, Size or Offset, then press the ENTER key.
Function – This parameter determines the mathematical function that is applied to the
output value of the fixture parameter. See earlier for full list of available functions.
Speed – This parameter determines the speed of the effect and also the ‘direction’ of
movement effects (eg Circle), where -100 is the fastest speed anticlockwise, 0 is stop, and
+100 is the fastest speed clockwise.
Size – This parameter defines the magnitude of the effect (range 0 – 100).
Offset – This parameter determines the offset into the effect when it is triggered.