Zero88 FROG 2, Operating Manual

Page: 151 / 184

Effects
Frog 2 Operating Manual – Issue 4.3 Page 151
Outputting Effects
Select a fixture or group of fixtures and then enter one of the following commands:
EFFECTS N ENTER Snaps the outputs to the programmed palette values.
EFFECTS N TIME ENTER Fades the outputs in time defined by the Time UDF.
EFFECTS N TIME X ENTER Fades the outputs in X seconds.
Copying Effects
To copy an effect palette from one location to another, enter the following command:
EFFECTS N COPY P ENTER Copies Effect N to Effect P.
As all palettes (including effects) have the same data structure and may contain fixture
parameter data from any combination of attributes, it is also possible to copy palettes from
one attribute to another, for example:
EFFECTS 2 COPY BEAM 5 ENTER Copies Effect Palette 2 to Beam Palette 5.
Moving Effects
To move an effect from one location to another, enter one of the following commands:
EFFECTS N MOVE P ENTER Moves Effect N to Effect P.
When an effect is moved to a new location, any cues that referenced the original effect
palette will now reference the new location of the palette.
As all palettes have the same data structure and may contain fixture parameter data from
any combination of attributes, it is also possible to move effects from one attribute to
another, for example:
EFFECTS 2 MOVE BEAM 5 ENTER Moves Effect 2 to Beam Palette 5.
Deleting Effects
To delete an effect, enter one of the following commands:
EFFECTS N DELETE or DELETE EFFECTS N ENTER
To delete a range of effect palettes, enter the following command:
DELETE EFFECTS A THRU B ENTER
When an effect is deleted, any cues that previously referenced the effect are updated to
contain the actual values that were stored in the effect palette.