Zero88 FROG 2, Operating Manual

Page: 134 / 184

User Definable Faders
Page 134 Frog 2 Operating Manual – Issue 4.3
Editing User Definable Faders
To edit a UDF enter the following command: LOAD <UDF>.
This allows you to load the contents of the UDF into the Program Window, adjust the
programmed channel levels and times as required and then save the data back into the
original UDF by pressing the UPDATE key.
Note - This function only applies to UDFs which have been assigned to channel data or a
cue. In the case of a cue, you effectively load the cue into the Program Window, modify it
and update it.
Deleting User Definable Faders
Individual UDF’s can be deleted (cleared) by entering the following command:
DEL <UDF>
Where <UDF> represents pressing the actual flash button on the front panel.