Zero88 FROG 2, Operating Manual

Page: 22 / 184

Quick Start Tutorial
Page 22 Frog 2 Operating Manual – Issue 4.3
Naming Fixtures
Use the arrow keys to move the cursor to the Name column of the required fixture and
then press the SET key. Enter the name of the fixture using the external keyboard, then
press the ENTER key.
Numbering Fixtures
Each fixture has its own fixture number. By default, the first fixture in each group is
numbered 1, and then sequentially onwards up to the quantity of fixtures in their group.
It is worth taking some time time thinking about numbering your fixtures. One method of
numbering fixtures would be to give each group of fixtures an individual start number.
The ALL row allows you to make changes which affect the whole group of fixtures.
Use the arrow keys to move the cursor to the ALL row and No column and then press the
SET key. Enter the fixture number for the first fixture in the group and press ENTER.
For example – select the MAC 500 fixture group and enter 501 in the All row and No
column. The MAC 500 fixtures will be renumbered 501, 502, 503 etc.
Editing Default / Home / Topset Values
Press the [Default] / [Home] / [Topset] key. Use the arrow keys to move the cursor to the
required column of the selected fixture and then press the SET key. Enter the required
value using the external keyboard or numeric keypad on the front panel of the desk, then
press ENTER.
Aligning Fixtures
Press the [Alignment] key. Use the arrow keys to move the cursor to the required column
of the selected fixture and then press the SET key. Use the arrow keys to move to the
Invert P, Invert T or P/T Swap column of the required fixture and then press the SET key.
Use the left and right arrow keys, to toggle between the values. Press the ENTER key.
Patch Functions
Press the [Patch] key. You can now patch, repatch or unpatch the selected fixture(s) or
change the fixture type. See Setup section of this manual for full details.