Zero88 FROG 2, Operating Manual

Page: 48 / 184

Setup
Page 48 Frog 2 Operating Manual – Issue 4.3
Editing Default Values
The Default values for fixture parameters are the values that are output when the fixture is
released.
The Default values are initially taken from the fixture profile data stored in the fixture library
in the desk. They are set to values that will produce an open white beam (no gobos or
effects) at a central position (Pan and Tilt at 50%).
These values can be edited on an individual fixture or group basis as required.
Use the arrow keys to move to the required column of the selected fixture and then press
the SET key.
Enter the required value using the external keyboard or numeric keypad on the front panel
of the desk, then press ENTER.
Editing Home Values
The Home values for fixture parameters are the values that are output when the fixture is
homed or highlighted.
The Home values for fixture parameters are taken from the fixture profile data stored in the
fixture library in the desk. They are initially set to values that will produce an open white
beam (no gobos or effects) at a central position (Pan and Tilt at 50%).
These values can be edited on an individual fixture or group basis as required.
Use the arrow keys to move to the required column of the selected fixture and then press
the SET key.
Enter the required value using the external keyboard or numeric keypad on the front panel
of the desk, then press ENTER.
Editing Topset Values
The Topset values for all fixture parameters are initially set to 100%.
These values can be edited on an individual fixture or group basis as required.
Use the arrow keys to move to the required column of the selected fixture and then press
the SET key.
Enter the required value using the external keyboard or numeric keypad on the front panel
of the desk, then press ENTER.