Zero88 FROG 2, Operating Manual

Page: 20 / 184

Quick Start Tutorial
Page 20 Frog 2 Operating Manual – Issue 4.3
Patching a Group of Fixtures
To patch an entire group of fixtures (eg All MAC 250s) sequentially from a start address,
press the GROUP key, select the group from the tool bar on the touch screen, press the @
key, enter the DMX start address and press ENTER.
For example: GROUP [MAC 250] @ 101 ENTER
Patching Individual Fixtures
To patch individual fixtures (eg the first MAC 500) at a specified start address, press the
GROUP key, select the group from the tool bar on the touch screen, select the required
fixture, press the @ key, enter the DMX start address and press ENTER.
For example: GROUP [MAC 500] 1 @ 274 ENTER
Patching by Fixture Number
If you have assigned each fixture an individual fixture number in the Edit Fixtures screen,
you can omit the group selection part of the command, and simply refer to the fixture(s) by
their individual fixture number(s)
For example: 301 @ 146 ENTER
Patching to a Specified Universe
Fixtures can also be patched to a specified universe by including the universe number in
the command. For example to patch the MAC 250’s to universe 3 starting at DMX address
201, enter the following command:
GROUP [MAC 250] @ 3/201 ENTER
Unpatching Fixtures
If an error is made in patching, the [Unpatch] soft key can be used in place of ENTER to
undo a patching command. For example:
GROUP [MAC 250] 1 THRU 5 @ 1 UNPATCH