Zero88 FROG 2, Operating Manual

Page: 137 / 184

User Definable Keys
Frog 2 Operating Manual – Issue 4.3 Page 137
Flash Mode
The Flash Mode option is only applicable to UDK’s containing Channel Data or Cue Data.
If the Flash Mode is set to Flash - the corresponding data assigned to the UDK is output
instantly on pressing the key and faded out or released instantly on releasing the key.
If the Flash Mode is set to Latch - The first press results in the ‘on’ action. The second
press results in the ‘off’ action. Subsequent button presses will then toggle between the
two states.
The LED in the UDK indicates the state of the key (on or off). When the outputs are fading
up or down, the LED in the UDK flashes.
Palettes are output instantly on pressing the UDK.
A Cue assigned to a UDK uses the fade times programmed in the cue data. The times for
the cue data can be displayed and edited as required via the
Preview UDK Window or by
loading the UDK into the Program Window . Note – if you edit the fade times for the cue,
this will also affect the output of the cue in the relevant cue stack on the playbacks.
Channel Data assigned to a UDK uses the fade times programmed with the channel data
in the
Program Window . The times for the channel data can be displayed and edited as
required via the Preview UDK Window or by loading the UDK into the Program Window .
Mixing Mode
Mixing Mode (HTP or LTP) is only applicable to intensity channels in UDK’s containing
Channel Data or Cue Data.
The intensity channels in the data are mixed either HTP or LTP.
Release
This setup option applies to Channel Data and Cue UDK’s only.
If the Release option is set to Yes then the fixtures will be released when the UDK is
released and the intensity (brightness) data has faded to zero.
If the Release option is set to No then the fixtures will NOT be released when the UDK is
released.
The fixtures being controlled by the UDK can be released by setting their values in the
Program Window or by triggering another LTP command from elsewhere on the console or
by holding down the RELEASE key and pressing the UDK on the front panel.