Zero88 FROG 2, Operating Manual

Page: 15 / 184

Introduction
Frog 2 Operating Manual – Issue 4.3 Page 15
Touch Screen
The LCD touch screen on the front panel of the desk is used primarily for displaying and
selecting commonly used functions.
The Home Screen contains the following soft keys:
[Values/Fade/Delay], [Percent/DMX/Details], [Active Playback Window], [Cue Stack],
[Program Window], [Output Window], [Park], [Unpark], [Effects Window], [Knockout] and
the shifted wheel editing mode eg [Relative].
Below the soft keys is the Status Line which shows the current fixture group selection (eg
All Fixtures), the Virtual Playback Master Level, Grand Master level, Live/Blind/Macro
indicator, Memory Meter and Time Value.
Below the Status Line is the Command Line which shows the command syntax as it is
entered.
The bottom area of the touch screen shows the wheel assignment data, Override display
and clock.
Adjusting and Calibrating the Touch Screen
To adjust the brightness and contrast of the touch screen, hold down the SETUP key.
The first finger wheel then controls the brightness of the touch screen and the second
finger wheel controls the contrast of the touch screen.
To re-calibrate the touch screen, press and hold SETUP and press the ENTER key. The
screen will then prompt you to press in the top left and bottom right corners.