![background image](http://html1.mh-extra.com/html/zeiss/elyra-7/elyra-7_operating-manual_3332235028.webp)
ZEISS
Startup and Shutdown of the System
ELYRA 7
24
000000-2262-999
03/2019 V_02
If the box is not ticked, the
Laser Off
dialog box
will appear that allows one to check on the listed
lasers (Fig. 16).
By the
Power
drop down menu, if available, the
laser can be left
On
, put in
Standby
or turned
Off
. Those lasers, for which no
Power
drop down
menu is available, are switched off automatically
when not in use. By expanding the Laser properties
field you can view the current status of the
selected laser. Press
Ok
after having made the
desired changes to exit the ZEN software.
3.2.2
Switching System Power Off
After having exited the ZEN software, you may turn off the whole system with the following
Shutdown
procedure.
•
Make sure you have saved all your image data.
•
Switch of all the lasers which might still be running.
•
Close the ZEN software window. This terminates the ZEN software.
•
Shut down WINDOWS.
•
About 20 seconds after WINDOWS is shut down your computer turns off.
For ELYRA systems you can now switch off the complete system by switching the
Main
switch to the off
position.
Alternatively
-
Switch off any device which have its own On/Off switch
-
Switch off multipoint connectors
-
Switch off lasers by the laser key switch
-
Switch off system by the Main switch of the ECU
Fig. 16
Laser Off dialog box