Installation
4
-
38
4.2.4
Installation options
WARNING!
Personal injury and damage to property
The following precautions must be taken.
Keep the robot controller lifted by the crane until the robot controller is stacked and fixed
securely.
It is possible to stack the YRC1000 controllers.
Follow the procedures below when stacking the YRC1000 controllers.
1. Remove the four eyebolts (4 places) on the top of the YRC1000 to be stacked lower
level.
2. Lift the controller by using the crane, and stack the controllers. Refer to chapter 4.1.1.1
"Using a crane"”, when using the crane.
4 x 12 eyebolts
1
A
A
Summary of Contents for YRC1000
