manualshive.com logo in svg

YASKAWA YRC1000, Instructions Manual

Share
Download
YASKAWA YRC1000 Instructions Manual Download Page 202

System Setup

9

 - 

202

3. Specify the button size.
–

Select a button from the three buttons in the dialog box.

4. The font size setting dialog box is closed, and the screen displays the buttons specified

in the dialog box.

–

The modification is applied only to the buttons in the area selected with the area setting
button (in this example, the change is applied only to the pull-down menu buttons in the
menu area).

To cancel the setting of the button size, follow the procedure below.

1.  Select {Cancel} in the button size setting dialog box.

–

The dialog box closes without changing the button size.

NOTICE

Do not turn OFF the robot controller power supply when the button size is being changed
(when the button size setting dialog box is on the screen, or when an hourglass is indicated
in the middle of the screen).

Summary of Contents for YRC1000







































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands