manualshive.com logo in svg

YASKAWA YRC1000, Instructions Manual

Share
Download
YASKAWA YRC1000 Instructions Manual Download Page 134

System Setup

9

 - 

134

2. Select „MAX/MIN“.

3. Press [MODIFY].
–

The message TEACH MAX/MIN POSITION appears.

4. Move the cursor to „<MAX>“ or „<MIN>“.
–

Move the cursor to „<MAX>“ if you want to change the maximum value and „<MIN>“ to
change the minimum value. The cursor moves to either „<MIN>“ or „<MAX>“ this time. 

5. Move the robot with the axis keys.
–

Move the robot with the axis keys to the positions of the maximum and minimum value
of the cube.

6. Press [ENTER].
–

The cube interference area is registered.

•

Entering the cube side and teach-in centre point using the numeric keys

1. Select „METHOD“.

Each time you press [SELECT], the display alternates between "MAX/MIN" and
"CENTER POS".

Summary of Contents for YRC1000







































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands