manualshive.com logo in svg

YASKAWA YRC1000, Instructions Manual

Share
Download
YASKAWA YRC1000 Instructions Manual Download Page 197

System Setup

9

 - 

197

9.19.1.3

Font size setting

To set the font size, first off display the font size setting dialog box as follows.
1. Select {DISPLAY SETUP} then {CHANGE FONT} under the main menu.

2. The font size setting dialog box appears on the center of the current window.

To set the font size in the font size setting dialog box, follow the procedure below. 

1. Specify the font style.
–

The {Bold Type} check box can be checked or unchecked alternately each time the
check box is selected.

•

Check the {Bold Type} check box as follows to set the font to the bold style.

•

Clear the {Bold Type} check box as follows to set the font to the regular style.

Summary of Contents for YRC1000







































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands