manualshive.com logo in svg

YASKAWA YRC1000, Instructions Manual

Share
Download
YASKAWA YRC1000 Instructions Manual Download Page 180

System Setup

9

 - 

180

6. Press the interlock key and the allocated key at the same time.
–

A message “Reserved display registered” appears, and the window is registered.

–

In this case, the CURRENT POSITION window is registered by pressing the interlock
key + [0] with the CURRENT POSITION window displayed on the screen.

NOTICE

When allocate the display allocation to a key, key allocation (SIM) will be set to the display
set.
Unable to allocate the display allocation and the another function to the same key.

9.15.3.5

Alternate output allocation

Set this function in the KEY ALLOCATION (SIM) window.
1. Move the cursor to the “FUNCTION” of the key to be allocated and press [SELECT].
–

Selection list appears.

2. Select “ALTERNATE OUTPUT”.
–

The output No. is displayed in the “ALLOCATION CONTENT”.

1) To change the output No., move the cursor to the No. and press [SELECT]. Then

numeric value can be entered.

2) Input the number to be changed, and press [ENTER].

Summary of Contents for YRC1000







































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands