manualshive.com logo in svg

YASKAWA YRC1000, Instructions Manual

Share
Download
YASKAWA YRC1000 Instructions Manual Download Page 121

System Setup

9

 - 

121

* In this case, the moment of inertia (Icxi, Icyi, Iczi) of the welding gun is not taken into
account, since each gun is smaller than the entire tool.

9.4.2.2

Tool load information registering

The tool load data is registered in the tool file.
1. Select {ROBOT} from the main menu.
2. Select {TOOL}.
–

The window with the tool coordinate list appears.

–

The tool coordinate list is only displayed if TOOL NO. SWITCH is set to PERMIT in the
TEACHING CONDITION window.

–

If TOOL NO. SWITCH is set to PROHIBIT in the TEACHING CONDITION window, the
tool window appears.

3. Select the desired tool number.
1) Move the cursor to the desired tool number, and press [SELECT] in the tool list window.
2) The tool coordinate window of the selected number appears.
3) Select the desired number in the tool list window by pressing the page button or clicking

the {PAGE} button.

4) To call the tool list window and the tool coordinate window, press {DISPLAY} 

→

 {LIST}

or {DISPLAY} 

→

 {COORDINATE DATA}.

<Setting> 

W :

10,000 kg

Xg :

100,000 mm

Yg :

-83,333 mm

Zg :

60,000 mm

lx

:

0.100 kgm²

ly

:

0,010 kgm²

lz

:

0,100 kgm²

Summary of Contents for YRC1000







































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands