manualshive.com logo in svg

YASKAWA YRC1000, Instructions Manual

Share
Download
YASKAWA YRC1000 Instructions Manual Download Page 355

Upgrade function

11

 - 

355

11 Upgrade function

11.1

Functional overview

YRC1000 applies two software for the CPU configuration: a software for ACP01 (for the
main CPU board) and a software for the programming pendant. The system works only with
the combination of certain versions due to a compatibility problem of each software.
Therefore, YRC1000 can upgrade the software for the programming pendant if the
combination of the software for ACP01 and the programming pendant is invalid.

11.2

Upgrade procedure

 

Confirmation of software version

The compatibility of the versions of ACP01 and the programming pendant are automatically
checked in 15 seconds after the YRC1000 power supply is turned on.

In case the versions of ACP01 and the programming pendant matches.
1. Automatic upgrade process completes and the communication process between

ACP01 and the programming pendant is restarted.

2. Initial window appears approx. 50 seconds later.

 

Automatic upgrade of programming pendant

In case that the pendant application version of the programming pendant is older than the
one of SD card in ACP01 or the pendant application version of the programming pendant
is not compatible to the one of ACP01, the programming pendant is automatically
upgraded.
Not only the application software but the OS of the programming pendant is also upgraded
automatically. (OS: Operating System)

Checking the version of pendant application. Waiting for a second.

Auto Upgrade
File = ppautoverup.exe
Do not turn the power off

1

1

Summary of Contents for YRC1000







































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands