manualshive.com logo in svg

YASKAWA YRC1000, Instructions Manual

Share
Download
YASKAWA YRC1000 Instructions Manual Download Page 77

Security system

8

 - 

77

3. Select the desired ID.

The character input line appears, and a message “Input ID no. (4 or more digits)”
appears (As for the safety mode, 9 or more digits).

4. Input the current ID and press [ENTER]..

When the correct user ID is entered, a new ID is requested to be input. “Input new ID
no.(4 or more digits)” appears (As for the safety mode, 9 or more digits).

5. Input new ID and press [ENTER].

User ID is changed.

8.4

Main CPU SD card ID

To display the Main CPU SD Card ID is described below.The main CPU SD Card ID is
necessary to issue the one time security code.
1. Change the security mode to the MANAGEMENT mode.

2. Select {SYSTEM INFO} in the main menu.

The sub menu appears.

Summary of Contents for YRC1000







































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands