manualshive.com logo in svg

YASKAWA YRC1000, Instructions Manual

Share
Download
YASKAWA YRC1000 Instructions Manual Download Page 191

System Setup

9

 - 

191

9.18.3

Initializing parameter files

1. Turn the power supply ON while pressing [Main Menu] simultaneously.
2. The SECURITY mode is changed to the MANAGEMENT mode.
3. Select {FILE} under the main menu.
4. Select {INITIALIZE}.
5. Select {PARAMETER}.
–

The parameter selection window appears.

6. Select the parameter to be initialized.
–

The selected data is marked with "

".

–

The I/O data marked with "

■

" cannot be selected.

7. Press [ENTER].
–

A confirmation dialog box appears.

8. Select {YES}.
–

The parameter data is initialized.

Summary of Contents for YRC1000







































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands