YASKAWA SGM7J-A5A, Technical Supplement

Page: 452 / 622

SERVOPACKS
434

-7S Single-axis MECHATROLINK-III Communications Reference SERVOPACKs
Model Designations
*1. You can use these models with either a single-phase or three-phase power supply input..
*2. The same SERVOPACKs are used for both Rotary Servo Motors and Linear Servo Motors.
*3. A model with a single-phase, 200-VAC power supply input is available as a hardware option (model: SGD7S-
120A30A008).
*4. These SERVOPACKs do not have an integrated Dynamic Brake Circuit. Please refer to page 567 for more information
on Sigma-7 400V Dynamic Brake Resistors.
30
Interface
*2
Code Specification
MECHATROLINK-III
communications reference
Design Revision Order
5th+6th digits
7th digit
B
Code Specification
Global Design Revision for
400V
A
Global Design Revision for
200V
A 200 VAC
D 400 VAC
F 100 VAC
SGD7S - R70 A 30 A
Maximum Applicable
Motor Capacity
Voltage
Code Specification
1st+2nd+3rd digits
4th digit
4th
digit
1st+2nd+3rd
digits
000
8th+9th+10th
digits
5th+6th
digits
7th
digit
R70
*1
R90
*1
1R6
*1
2R8
*1
3R8
5R5
*1
7R6
120
*3
180
200
330
470
550
590
780
R70
R90
2R1
2R8
0.05 kW
0.1 kW
0.2 kW
0.4 kW
0.5 kW
0.75 kW
1.0 kW
1.5 kW
2.0 kW
3.0 kW
5.0 kW
6.0 kW
7.5 kW
11 kW
15 kW
0.05 kW
0.1 kW
0.2 kW
0.4 kW
Voltage Code Specification
Three-
phase,
200
VAC

-7 Series

-7S SERVOPACKs
Single-
phase,
100 VAC
1R9
3R5
5R4
8R4
120
170
210
*4
260
*4
280
*4
370 *4
0.5 kW
1.0 kW
1.5 kW
2.0 kW
3.0 kW
5.0 kW
6.0 kW
7.5 kW
11 kW
15 kW
Voltage Code Specification
Three-
phase,
400
VAC
000 Without options
026 With relay for holding brake
Hardware Options (400V Models ONLY)
Code Specification
8th+9th+10th digits
000 Without options
F64 Zone Table
FT/EX Spec (400V Models ONLY)
Code Specification
11th+12th+13th digits
F64
11th+12th+13th
digits
Note: F64 options is standard for 400V
amps and not available for 200V amps.
Shaded items are non-stock