YASKAWA SGM7J-A5A, Technical Supplement

Page: 16 / 622

16
The documents that are related to the MP3300 Machine Controllers and series AC Servo Drives are
shown in the following table. Refer to these documents as required.
Brochure/Catalog Name
(Document No.)
Manual Name
(Manual No.)
Description of Document
Yaskawa Motion Product Brochure:
Confident, Consistent, Capable
(BL.MTN.01)
−
This brochure presents an introduction to
Yaskawa America Motion Products and
services, with an emphasis on AC Servo,
Machine Controller, and IO products.
Series AC Servo Drives and Motors
Technical Supplement
(YAI-KAEPS80000123)
MP3300iec Machine Controller
Hardware Manual
(YAI-SIA-IEC-7)
Provides detailed information on selection
and installation MP3300iec machine
controller components/accessories.
SERVOPACK with
MECHATROLINK- 3 Communications References
Product Manual
(SIEPS80000128)
Provides detailed information on
selecting -Series SERVOPACKs
and information on installing,
connecting, setting, performing
trial operation for, tuning, and monitoring the
Servo Drives.
SERVOPACK with Analog
Voltage/Pulse Train References
Product Manual
(SIEPS80000126)
SERVOPACK with EtherCAT (CoE)
Communication References
Product Manual
(SIEPS80000155)
SERVOPACK with
MECHATROLINK- 3 Communications References
Product Manual
(SIEPS80000129)
-Series/ -Series for Large-
Capacity Models/ -Series User’s
Manual Safety Module
(SIEPC72082906)
Provides details information required for the
design and maintenance of a Safety Module.
Rotary Servomotor Product Manual
(SIEPS80000136)
Provide detailed information on
selecting, installing, and connecting
the -Series Servomotors.
Linear Servomotor Product Manual
(SIEPS80000137)
Direct Drive Servomotor Product Manual
(SIEPS80000138)
Peripheral Device Selection Manual
(SIEPS80000132)
Describes the peripheral devices
for a -Series Servo System.
MECHATROLINK- 3 Communications
Standard Servo Profile Command Manual
(SIEPS80000131)
Provides detailed information on the
MECHATROLINK- 3 communications
standard servo profile commands that are
used for a - Series Servo System.
Digital Operator Operating Manual
(SIEPS80000133)
Describes the operating procedures for a Digital
Operator for a -Series Servo System.
Engineering Tool
S Online Manual
Component
(SIEPS80000148)
Provides detailed operating procedures
for the S Engineering Tool
for a -Series Servo System.
Related Documents