Yamaha YZ450F, Owner'S Service Manual

Page: 530 / 650

5 - 46
CHAS
HANDLEBAR
4. Install:
• Grip (left)
1
Apply the adhesive to the handlebar
2
.
NOTE:
• Before applying the adhesive, wipe off
grease or oil on the handlebar surface
a
with a lacquer thinner.
• Install the grip (left) to the handlebar so that
the line
b
between the two arrow marks
faces straight upward.
5. Install:
• Grip (right)
1
• Collar
2
Apply the adhesive on the tube guide
3
.
NOTE:
• Before applying the adhesive, wipe off
grease or oil on the tube guide surface
a
with a lacquer thinner.
• Install the grip to the tube guide so that the
grip match mark
b
and tube guide slot
c
form the angle as shown.
R
L
64˚
3
1
b
c
6. Install:
• Collar
1
• Cover (grip cap)
2
• Throttle grip
3
NOTE:
Apply the lithium soap base grease on the
throttle grip sliding surface.
7. Install:
• Throttle cables
1
To tube guide
2
.
NOTE:
Apply the lithium soap base grease on the
throttle cable end and tube guide cable wind-
ing portion.