Yamaha XT1200Z(Z) 2010, Service Manual

Page: 547 / 616

ABS (ANTI-LOCK BRAKE SYSTEM)
8-98
WARNING
EWA23P1019
When maintenance or checks have been performed on components related to the ABS, be sure
to perform a final check before delivering the vehicle to the customer. (Refer to “[D-3] FINAL
CHECK” on page 8-131.)
EAS27830
[A] CHECKING THE ABS WARNING LIGHT
Set the main switch to “ON”. (Do not start the engine.)
1. The ABS warning light does not come on. [B-1]
2. The ABS warning light flashes. [B-2]
3. The ABS warning light remains on. [B-3]
4. The ABS warning light comes on for 2 seconds, then goes off. [B-4]
EAS23P1048
[B-1] THE ABS WARNING LIGHT FAILS TO COME ON
1. Only the ABS warning light fails to come on when the main switch is set to “ON”. [C-1]
2. The ABS warning light and all other indicator lights fail to come on. [C-2]
EAS23P1049
[B-2] THE ABS WARNING LIGHT FLASHES
1. Test coupler adapter
• Check if the test coupler adapter is connected to the ABS test coupler.
• If the test coupler adapter is connected, disconnect it, and then install the protective cap onto the
ABS test coupler.
• If the test coupler adapter is not connected, refer to “[B-5] MALFUNCTIONS ARE CURRENTLY DE-
TECTED” on page 8-99.
EAS23P1050
[B-3] THE ABS WARNING LIGHT REMAINS ON
1. A malfunction is detected. [B-5]
EAS23P1051
[B-4] THE ABS WARNING LIGHT COMES ON FOR 2 SECONDS, THEN GOES OFF
Remove the rider seat to access the ABS test coupler “1”. Remove the protective cap from the ABS
test coupler, and then connect the test coupler adapter “2” to the coupler. The T/C terminal (sky blue)
is now grounded.
1. A fault code is indicated by the ABS warning light (example: fault codes 12, 21).
1
2