Yamaha MM700A, Manual, Page: 95 / 282

LUBRICATION, MAINTENANCE AND TUNE-UP 89
Table 7 MAINTENANCE TORQUE SPECIFICATIONS
N*m
base nuts 28 20
Cylinder head nuts 23 17
Engine mounts
Refer to Chapter Four
manifotd bolts 27 20
Spark plug 20 177
Table SPARK PLUGS
I
All models NGK mm in.)
Table PILOT SCREW INITIAL SETTING
All 593 cc models 2 turns out
All 698 cc models 1 turns out
Table 10 RECOMMENDED IDLE SPEED SETTING
All models 1500-1 700 rpm
Table HIGH-ALTITUDE CLUTCH FT.
Model Shift weight [outer) Shift weight {inner) Spring
Steel 13.3 Steel 13.9
(1997-1 999) Aluminum Steel 13.3
1
(2000-on) Steei Steel 13.3
10.3 Steel 13.9
1
Steel 10.3 Steel 13.9
1
Steel 10.3 Steel 13.9
1
Steei 10.3 17.2
None Steel 13.9
1
Aluminum 10.3 Steel 13.9
1
Aluminum 10.3 Steel 10.3
1
Steel 13.9
Steel 10.3 Steel 13.9
Steel 10.3 Steel 13.9
Use sea level (standard) specification.
2.
Recommended secondary sheave spring seat cam angle is
CLUTCH
weight Shift weight (inner) Spring
Steel 13.3 Steel 10.3
Aluminum 10.3 None
(2000-on} Aluminum 10.3 Steel 13.9
Aluminum 10.3 Steel 10.3
(continued)