Yamaha MM700A, Manual, Page: 69 / 282

LUBRICATION, MAINTENANCE AND TUNE-UP 63
Pivot Pins
Lubricate the ski pivot pins and bushings (Figure 8)
seasonally or every 2000 miles with
a low-temperature
grease. Refer to Chapter Thirteen and remove each ski for
access to the pivot pin and bushing.
Steering Column
Lubricate the steering column bearings seasonally or
every 2000 miles with a low-temperature grease. Refer to
Chapter Thirteen and remove the bearing holders. Apply
grease to the bearing surfaces, then reinstall the steering
column.
Control Cable Ends
Periodically lubricate the throttle and oil control cable
ends and pockets in the throttle lever (Figure 9) with a
low-temperature grease. Periodically lubricate the park-
ing brake control cable end at the parking brake lever
(Figure 10) with a low-temperature grease.
NOTE
does not recommend lubricating
control cables to prevent possible cable
in extremely cold temperatures.
SCHEDULED MAINTENANCE
Refer to Tables 1-3 for schedule maintenance intervals.
Refer to Lubrication in this chapter for all lubrication re-
lated service procedures. scheduled maintenance service
procedures are described as follows.