Yamaha FX Nytro FX10MTRAX, Service Manual, Page: 298 / 859

4-27
POWR
TR
DRIVE CHAIN
2. Install:
• Shift rod
1
3. Adjust:
• Shift rod length
a
Adjustment steps:
• Move the shift lever to the “FWD.” position.
• Loosen the locknuts
2
.
• Turn the shift rod 1 so that shift rod free play is
0 mm (in direction where
a
can be lengthened
appropriately) and then turn back the shift rod
1/2 turns.
• Tighten the locknuts.
4. Fill:
• Drive chain oil
Refer to “DRIVE CHAIN” in CHAPTER 2.
5. Adjust:
• Drive chain slack
Refer to “DRIVE CHAIN” in CHAPTER 2.
T
R
.
.
Shift rod end locknut:
7 Nm (0.7 m · kg, 5.1 ft · lb)
1
a
2
2