Yamaha FX Nytro FX10MTRAX, Service Manual, Page: 24 / 859

1-2
GEN
INFO
IMPORTANT INFORMATION
IMPORTANT INFORMATION
PREPARATION FOR REMOVAL AND DISASSEMBLY
1. Remove all dirt, mud, dust, and foreign material before removal and
disassembly.
While cleaning, take care to protect the electrical parts, such as relays,
switches, motor, resistors, controllers, etc., from high pressure water
splashes.
2. Use proper tools and cleaning equipment.
Refer to “SPECIAL TOOLS”.
3. When disassembling the snowmobile, keep mated parts together. This
includes gears, cylinders, pistons, and other parts that have been
“mated” through normal wear. Mated parts must be reused or replaced
as an assembly.
4. During disassembly of the snowmobile, clean all parts and place them
in trays in the order of disassembly. This will speed up assembly time
and help ensure that all parts are reinstalled correctly.
5. Keep all parts away from any source of fire.
6. Be sure to keep to the tightening torque specifications. When tighten-
ing bolts, nuts, and screws, start with those that have larger diameters,
and proceed from the inside to the outside in a crisscross pattern.
ALL REPLACEMENT PARTS
We recommend using genuine Yamaha parts for all replacements. Use oil
and grease recommended by Yamaha for assembly and adjustments.