
2-34
INSP
ADJ
BRAKE FLUID LEVEL INSPECTION/
BRAKE PAD INSPECTION/BRAKE HOSE INSPECTION
WARNING
• Use only the designated brake fluid. Other flu-
ids may deteriorate the rubber seals, causing
leakage and poor brake performance.
• Refill with the same type of fluid. Mixing fluids
may result in a harmful chemical reaction
leading to poor brake performance.
• When refilling, be careful that water does not
enter the brake master cylinder reservoir.
Water will significantly lower the boiling point
of the fluid and may cause vapor lock.
BRAKE PAD INSPECTION
1. Remove:
• Right side cover
Refer to “COVERS” in CHAPTER 3.
2. Apply the brake lever.
3. Inspect:
• Brake pad wear limit
a
Wear indicator groove
1
almost disappeared
→
Replace as a set.
Wear limit:
1.5 mm (0.06 in)
1
a
BRAKE HOSE INSPECTION
1. Inspect:
• Brake hose
Cracks/damage/wear
→
Replace.
2. Check:
• Fluid leakage
Apply the brake lever several times.
Fluid leakage
→
Replace the defective parts.
Summary of Contents for FX Nytro FX10MTRAX
