CONTROL SYSTEM/POWER UNIT
INSP
ADJ
E
3-5
c
d
2
4
1
a
2
3
1
Adjustment steps:
8
Set the shift lever in neutral.
8
Loosen the locknut
1
or
2
.
8
Adjust the start-in-gear protection
wire adjuster
3
so that the marking
of lever
4
can align with the marking
a
of the starter case.
8
Tighten the locknut
2
or
1
.
Start-in-gear protection adjustment
1. Check:
9
Start-in-gear protection operation
Incorrect
®
Adjust.
2. Adjust:
9
Start-in-gear protection wire
Adjustment steps:
8
Turn the throttle stop screw
2
in di-
rection
c
or
d
until the specified
idling speed is attained.
Turning in
c
c
®
Idling speed increases.
Turning out
d
d
®
Idling speed decreases.
4. Adjust:
9
Idling speed
POWER UNIT
Engine oil level
NOTE:
9
Run the engine for several minutes, turn
it off, and check the engine oil level.
9
When checking, hold the outboard motor
in the upright position and screw in the
oil level plug.
1. Remove:
9
Oil level plug
1
