CONTROL SYSTEM
INSP
ADJ
E
3-3
503012
1
2
3
Idling speed (for USA)
NOTE:
Before adjusting the idling speed, the throt-
tle cable slack should be properly adjusted.
1. Measure:
9
Idling speed
Out of specification
®
Adjust.
Idling speed:
1,500 ± 50 r/min.
CONTROL SYSTEM
Throttle cable
NOTE:
Make sure to check the idling speed, after
adjusting the throttle cable.
1. Inspect:
9
Throttle cable
Slack
®
Adjust.
Damage
®
Replace.
2. Adjust:
9
Throttle cable set condition
Adjustment steps:
8
Turn the throttle grip in arrow direc-
tion and hole to fully closed position.
8
Enough to loosen the throttle stop
screw
1
.
8
Loosen the throttle cable locking
screw
2
and keeping the throttle
lever on the carburetor fully in the
closed position by turning in arrow
direction.
8
Check the throttle cable
3
with no
(noticeable) slack, then tighten the
throttle cable locking screw
2
.
8
Make sure the throttle lever on the
carburetor fully open and fully closed
in operation by turning the throttle
grip.
8
If the throttle lever does not operate
in the fully opened position, re-adjust
the throttle cable.
