Emprise 7000 Installation and Service Guide 8
Installation Requirements
All components of an Emprise system are designed to be installed in a standard 19-inch rack.
Compare the packing slip with your order to verify that all of the components you ordered have
arrived before you begin the installation.
To install the Emprise components, you need the following information:
•
Completed Emprise 7000 Site Survey
•
Emprise 7000 Configuration Guide (http://support.xiotech.com)
•
Dimensional Storage Cluster (DSC) ID, which is located on the license CD
•
Network configuration, including the following:
–
Gateway address
–
DNS
–
Time server
–
Netmask
–
IP addresses for each system controller and ICON
You also need the following equipment, provided by Xiotech:
•
Cables (Ethernet and fiber)
•
Power cords
•
An ICON system serial cable (a tan 9-pin null modem serial cable)
•
A system controller serial cable (a tan 9-pin null modem serial cable)
•
Screws (#6, #8, #10, 1/4’’)
•
A wrist grounding strap
•
A fiber cleaning kit
And you need the following equipment of your own:
•
A laptop running a terminal emulator
•
A Phillips screwdriver (#2 and #3)
•
A 11/32 wrench or socket
Note:
You must be a trained Xiotech engineer to install components of an Emprise
system. Contact Xiotech Customer Support at 1.800.734.4716 to schedule an
installation at your location.
Caution:
To reduce the risk of Electrostatic Discharge (ESD), wear a grounded wrist
strap while performing these procedures. Put on the anti-static wrist strap and
attach it to a grounded surface such as the exposed metal surface of the
chassis or the rack enclosure. Keep the wrist strap on for the remainder of this
procedure.
